Sano Blast Restoration

Auto Restoration is a service that repairs and restores vehicles to their original condition, including fixing body damage, repainting, mechanical repairs, and safety checks to ensure the car runs well and looks like new again.

Automotive undercoating is a protective spray or coating applied to the underside of a vehicle to shield metal from rust, salt, and moisture. It seals gaps, reduces road debris damage, and is typically applied by professionals or at DIY intervals.

CO2 blasting uses compressed carbon dioxide to clean or remove coatings from surfaces by propelling a jet of dry ice particles and gas; it is a non-scratch cleaning method that freezes and lifts contaminants in a controlled, low-abrasive process.

Concrete Cleaning is a service that removes dirt, stains, and grime from concrete surfaces like driveways and sidewalks using pressure washing, detergents, and sometimes sealants to restore a clean, like-new appearance and protect the material.

Deep Cleaning is a thorough cleaning service that goes beyond usual tidy ups, focusing on hard-to-reach areas, removing built-up dirt, dust, and grime from surfaces, appliances, and vents to make spaces look like new.

Dry Ice Blasting is a cleaning method that uses tiny pellets of frozen CO2 shot at surfaces. It lifts away dirt, grease, and coatings without harming the material, leaving no residue. It’s non-abrasive, non-conductive, and often used for delicate equipment.

Dry ice is solid carbon dioxide that turns into gas as it warms. It’s used for cooling or creating fog effects; handling requires gloves and ventilation because it can cause burns and safety hazards from sublimation and CO2 buildup.

Engine Cleaning is a service that removes built-up dirt, oil, and grime from an engine to improve performance and cooling. It involves inspecting, safely applying cleaners, scrubbing or steam cleaning, and drying the engine before testing run.

Environmental Cleaning is cleaning and disinfecting spaces to remove dirt, germs, and pollutants. It involves wiping surfaces, sanitizing tools, proper waste disposal, and following safety steps to keep homes, offices, and public areas healthy.

Graffiti Removal is a service that cleanly removes painted or marker graffiti from walls and surfaces using approved cleaners and methods, restoring the area to its original appearance with minimal damage and downtime.

Granite cleaning is a service that restores the shine and removes stains from granite surfaces by using specialized cleaners, gentler abrasives, and sealers to brighten, protect, and prolong the beauty of countertops, floors, and monuments.

Grease Removal is a cleaning service that eliminates oily residues from surfaces and equipment, using degreasers, scrubbing, and rinsing to leave facilities clean, safe, and ready for use.

Grout Cleaning is a service that cleans the gaps between tiles to remove dirt, stains, and mold. It involves scrubbing and sometimes sealing the grout to restore color and prevent future staining, improving tile appearance and hygiene.

Heavy Equipment Service is the maintenance and repair of large machines like bulldozers, excavators, and loaders. It involves inspections, routine servicing, parts replacement, diagnostics, and on-site or shop repairs to keep equipment reliable and safe.

Industrial Cleaning is a service that removes dirt, grime, chemicals, and waste from factories, plants, and large facilities. It involves high-pressure washing, degreasing, floor care, waste handling, and safety procedures to keep equipment, workers, and environments clean and compliant.

Kitchen Hood Cleaning is a service that thoroughly cleans the oil- and grease-covered components of a kitchen exhaust system, including ducts, hoods, fans, and filters, to improve safety, airflow, and compliance with health codes.

Machine Cleaning is the process of removing dirt, debris, and residues from equipment to keep it running smoothly. It involves wiping, washing, or vacuuming parts, sanitizing surfaces, and sometimes disassembling components for thorough cleaning and maintenance.

Mold Remediation is cleaning and removing mold from homes, stopping mold growth, and fixing moisture problems to prevent future outbreaks, using containment, cleaning, and sometimes repairs or air treatment to make indoor air safe.

Mold removal is cleaning and eliminating mold growth from homes or buildings to improve air quality and prevent damage. It involves identifying damp areas, safely containing spores, removing affected materials if needed, and treating surfaces to prevent recurrence.

Pool Tile Cleaning is a service that removes stains, algae, and mineral buildup from the pool’s tile surfaces. It involves brushing, scrubbing, and sometimes resealing to restore shine and prevent slippery, unattractive grout and tile lines.

Pressure washing is cleaning surfaces with a powerful stream of water to remove dirt, grime, mold, and grime from buildings, driveways, decks, and more. It involves using a pressure washer, choosing the right nozzle, and applying water at high force safely.

Restaurant kitchen cleaning is a service that thoroughly cleans and sanitizes all kitchen areas, including floors, walls, appliances, hood filters, and surfaces, removing grease, stains, and residue to maintain hygiene and safety for food preparation.

Room Cleaning is a service that tidies a room by dusting surfaces, vacuuming or sweeping floors, wiping furniture, changing linens or emptying trash, and refreshing the space to make it neat, clean, and comfortable.

Smoke Damage Cleanup is a service that removes soot, smoke odors, and water damage after a fire, cleans and sanitizes affected areas, repairs damaged surfaces, and restores belongings to reduce health risks and restore safety and comfort.

Surface Cleaning is a service that removes dirt, dust, and grime from floors, countertops, and other horizontal surfaces using cleaning tools and solutions to leave them clean and refreshed.

Surface Preparation is the process of readying a surface for coating or finishing by cleaning, sanding, priming, and smoothing to remove dirt, oils, rust, or old coatings, ensuring good adhesion and a durable result.

Truck undercoating is a protective spray or coating applied to the underside of a truck to guard against rust, salt, and corrosion. It involves cleaning the area, masking parts, and applying a durable protective layer that adheres to metal and seams.

Undercarriage reconditioning is a service to restore worn or damaged undercarriage parts of heavy equipment (like tracks, rollers, and idlers) to good working condition, including inspection, cleaning, replacement of worn components, and lubrication to extend life and performance.

Undercoating is a protective seal sprayed onto the underside of a vehicle to prevent rust and damage from road salt, water, and debris. The process coats exposed metal, often using a rubberized or wax-based material, and may require cleaning and curing time.