ABM Blasting LLC

Abrasive blasting is a cleaning and surface-prep technique that uses hardy particles blasted at a surface to remove rust, paint, or scales, leaving a smooth or textured finish ready for coating or inspection.

Blasting & Coatings is a service that cleans and prepares surfaces by blasting away rust, paint, or debris, then applies protective coatings or paints to seal and decorate the surface, improving durability and appearance.

Boat Blasting Service uses high-pressure water or abrasive blasting to clean boats, remove old paint, barnacles, and grime, prepare surfaces for coatings, and restore hulls, decks, or gear through controlled, professional blasting under safety standards.

Boat Restoration is the process of repairing and reviving a damaged or aged boat, fixing hulls, fittings, and systems, cleaning, varnishing, and repainting, and sometimes upgrading equipment to restore its appearance, seaworthiness, and value.

Bottom Paint Removal is the process of removing old antifouling paint from the hull of a boat to restore a clean surface. It involves identifying paint layers, safely stripping them, and preparing the hull for a fresh coating or maintenance.

Car Body is a service that covers the exterior and structure of a vehicle, including panels, paint, rust repair, dents, and sheet metal work to restore or improve the car’s appearance and integrity.

Chemical Cleaning is the process of using safe chemicals to remove dirt, grime, rust, or contaminants from surfaces or equipment. It involves applying chemicals, letting them work, and flushing or rinsing them away to restore cleanliness and function.

Coating & Paint covers applying protective or decorative finishes to surfaces, including primers, paints, sealants, and coatings. It involves surface prep, choosing the right materials, applying evenly, and curing to protect and enhance appearance.

Coatings Removal is the process of safely removing protective or decorative coatings, like paint or sealant, from a surface. It involves preparing the area, choosing appropriate methods (chemical, mechanical, or abrasive), and completing cleanup and inspection.

Concrete Coating is a protective layer applied to concrete surfaces to guard against stains, wear, and moisture. It involves cleaning the surface, repairing cracks, and applying a durable sealant or coating for easier maintenance and a refreshed look.

Dry Ice Blasting is a cleaning method that uses solid CO2 pellets shot at surfaces to remove dirt, paint, and grime without leaving residue or causing heat damage; it gently foams away contaminants and raises the surface slightly to reveal a clean finish.

Fire Restoration is a service that repairs and cleans properties damaged by fire. It involves assessing damage, removing smoke and soot, drying and rebuilding structure, replacing damaged materials, and helping restore safety and appearance of the home or business.

Grit blasting is a cleaning process that shoots abrasive particles at a surface to remove paint, rust, or coatings, leaving a roughened finish. It involves blasting media, monitoring pressure, and preparing the surface for coating or bonding.

High Pressure Cleaning uses a powerful water spray to remove dirt, grime, mold, and stains from surfaces such as driveways, decks, walls, and roofs. It involves a high-pressure washer, appropriate detergents, and careful technique to avoid damage.

Industrial Cleaning is professional cleaning of factories, plants, and warehouses using specialized equipment and methods to remove dirt, oils, dust, and residues from floors, equipment, and processes, ensuring safe, compliant, and efficient operations.

Log cabin blasting refers to using controlled explosive charges to remove a wooden log cabin or parts of it during demolition or rescue operations, typically carried out by trained professionals with safety clears and structural considerations.

Media blasting is a cleaning/finishing process that uses a high-pressure stream of abrasive particles to remove paint, rust, scale, or contaminants from surfaces, revealing a clean, textured finish and preparing the material for coatings or further processing.

Mobile Sandblasting is on-site abrasive cleaning that uses pressurized media to strip paint, rust, or coatings from surfaces. A portable unit blasts and cleans the area at your location, preparing surfaces for repainting or restoration.

Mobile log cabin surface preparation is a on-site service that cleans, sands, and treats exterior wood to remove dirt, old finish, and rough spots, ensuring a smooth, ready-to-finish surface for painting or sealing.

Mold Remediation is cleaning and removing mold from your home to improve air quality and prevent damage. It involves assessing moisture, containing the area, removing moldy materials, cleaning surfaces, and fixing sources of moisture to prevent recurrence.

Paint Removal Sandblasting uses pressurized abrasive blasting to strip old paint and coatings from surfaces, such as metal or concrete, using sand or similar media, preparing the surface for coating, repair, or refinishing.

Pool resurfacing is the process of renewing the inner surface of a swimming pool to restore appearance and protect it from damage. It involves cleaning, repairing cracks, applying a new coating or plaster, and sealing to extend the pool’s life and improve usability.

Rust Removal Sandblasting is a service that uses high-velocity abrasive particles to blast away rust from metal surfaces, preparing them for coating or finishing. It involves cleaning, smoothing any rough edges, and restoring metal integrity efficiently.

A sandblasting machine is a device that shoots abrasive particles at a surface to clean, etch, or finish it. It involves a compressor to propel grit through a nozzle, directing a high-pressure blast to remove paint, rust, or smooth rough surfaces.

Steam Cleaning is a cleaning service that uses hot steam to loosen dirt, sanitize surfaces, and remove grime from floors, carpets, upholstery, and other items without harsh chemicals, leaving things refreshed and deodorized.

Surface Cleaning is a cleaning service that removes dirt, dust, and grime from surfaces such as countertops, floors, walls, and fixtures using appropriate tools and cleaners to leave them clean and safe.

Vapor blasting uses a water-based abrasive mix sprayed at high pressure to clean surfaces. It combines vaporized water with abrasive particles to remove grime, coatings, and oxidation while cooling the surface, leaving a smooth, nondamaging finish.

Water Blasting uses high-pressure water jets to clean surfaces, remove paint, grime, or concrete, and prepare areas for coatings. It involves spraying pressurized water at controlled levels to safely rinse and strip materials without chemicals.

Wood Log stain removal is a service that cleans or removes stains from wooden logs, restoring color and finish. It involves cleaning, scrubbing, treating with stain-removing products, and prepping the wood for resealing or refinishing.

Boat blasting and vehicle refers to cleaning or preparing boats and vehicles using high-pressure water, abrasive materials, or other blasting methods to remove paint, rust, grime, or coatings for repair or refinishing.

Dry ice blasting non abrasive is a cleaning method that uses frozen CO2 pellets to lift dirt and contaminants from surfaces without damaging them; the pellets sublimate into gas on impact, leaving no residue and requiring minimal setup and cleanup.

Dustless blasting is a cleaning method that uses a mix of water, abrasive material, and air to remove paint, rust, and coatings from surfaces. It cools as it works, minimizes dust, and prepares surfaces for refinishing with less mess than traditional blasting.

Fire damage wood and mold removal is a service that cleans and restores wood damaged by fire, removes smoke and soot, tackles water-related mold growth, dries the area, and repairs or replaces affected wood to restore safety and structure.

Food equipment cleaning is the process of washing and sanitizing tools and surfaces used in food preparation, like counters, ovens, mixers, and utensils, to remove dirt, grease, and germs, ensuring safe, hygienic cooking and storage.

Mobile powder coating is a service that applies a durable, dry powder coating to metal surfaces at your location. Technicians prep the item, mask areas, spray powder, and cure it with heat on-site, providing a tough, even finish with minimal dust.

Mobile sandblasting is a cleaning and preparing service where a technician arrives with a portable blasting unit to remove rust, paint, grime, or corrosion from surfaces on-site, using abrasive media and compressed air to restore or prep wooden, metal, or concrete surfaces.

Thermoplastic coating is a heat-softened protective layer that becomes pliable when heated and hardens as it cools, forming a durable, flexible film on surfaces to resist wear, moisture, and chemicals.

Wood or concrete blasting is a cleaning or preparation process that uses high‑pressure abrasive material to strip paint, rust, or coatings from wooden or concrete surfaces, revealing a clean base for finishing or repairs. It involves blasting equipment, media, and safety measures.